Proaim Airwave V15 Camera Vibration Isolator Arm (15-50kg/33-110lb)

EAN: 9507629699291 SKU VI-ARWV-15 Categorie

2.280,17 Excl. btw 2.052,15 Excl. btw

Geschatte levering tussen 3 - 7 werkdagen

De prijs gaat omhoog wanneer de timer op 0 staat.

advanced divider

Wil jij dit product financieren?

Proaim Airwave V15 Camera Vibration Isolator Arm (15-50kg/33-110lb)


Proaim Airwave V15 Shock Absorbing Arm provides the ultimate experience in vehicular stabilization. Dual Spring Configuration and Tri-way Dampening System provides ultra-smooth shots even when carrying heavy payloads at high speeds. The faster you go, the more the arm will provide enhanced resistance, peak shock absorption, and stability. The built-in damping adjustment knobs can be used to fine tune your rig for optimal calibration.
The vibration isolator arm is Precision engineered to be used with Remote Pan tilt Heads, Stabilized Heads & 3-Axis Gimbals. It is custom designed to reduce high/low frequency vibrations, roll tilt & pan errors and hard impact shocks typically experienced when shooting from moving platforms on rough terrain or paved roads. Not only does it helps to stabilize the image but lessens the load on Gimbal motors that now only have to work to stabilize a softened, smoother range of vibrations. Proaim Airwave V15 is a hard mount system, made for stabilized camera heads that you want to mount on vehicles such as cars, ATVs, boats, snowmobiles etc.

Tri-way Dampening – The Arm provides damping adjustment knobs for side-to-side and back-to-front movement in order to sustain excessive shock from a fast-moving vehicle or uneven terrain.
Payload – The Arm can handle various shooting environments via the shock absorbing springs with built-in tension adjustment from 15kg to 50 kg / 33lb to 110lb.
Easy Setup – The Arm mounts to 1.5 – 2 inch speed rail / scaff tube using its two rear mounted scaff clamps. Simply connect it to any vehicle car mount rig, making it a highly flexible system to get a variety of car-mounted shots.


– Airwave V15 Camera Vibration Isolator Arm
– Ronin Plate (DJI-QR)
– Nose Plate
– L Plate
– Flight Case


Belangrijkste kenmerken

– Construction: Commercial-grade Aluminum
– Arm Payload: 15-50kg/33-110lb
– Connects to 38-65mm Scaffold Pole
– Dimensions of Arm (LxHxW): 27″x14″x7″
– Lift range: 24″
– Temperature Range from : -20° to +50°
– Product Weight: 10.91kg / 24lb
– Product Weight with Flight Case: 28.5kg/62.8lb
– Dimensions of Flight Case (Without Packing) LxWxH: 58cm x 55cm x 30cm


Er zijn nog geen beoordelingen.

Wees de eerste om “Proaim Airwave V15 Camera Vibration Isolator Arm (15-50kg/33-110lb)” te beoordelen

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

Translate »