AIR Commander v2Entire Combo
Let op! De geschatte levertijd is een indicatie. In de huidige situatie kan de levertijd afwijken. Wil je de exacte levertijd weten van dit product? Neem dan contact op met onze helpdesk.
Advies & Support door professionals
Zorgvuldig geselecteerd assortiment
Gratis verzending vanaf € 99,-
Voor professionals door professionals
Beste prijs garantie
AIR Commander v2Entire Combo
This product is Combo of AIR Commander v2 & AIR Commander Entire.
AIR Commander v2 is used as datalink for remote control of the Entire. This is most user friendly solution on the market. No expansion boxes, confusing SBUS mapping and etc. With new DUAL-BAND transmission, the range of AIR Commander v2 has exceeded 1km and massively improves the reliability when used together with LightBridge 2.
When used as camera remote, can be assigned as an extension for AIR Commander v2, or as a standalone solution with SBUS input. Control for almost all cameras on the market, simple and user-friendly way. A wide variety of outputs and inputs. An incredibly simple geotagging solution, your GPS / RTK coordinates go directly into JPG/RAW photos in the camera SD card. Compatible with AIR Commander v2, just map button functions and your remote is ready to go.
- tested(Axxxx, A7Sx, A7Rx, A7x, A9, RX10 III, RX100 V)
- tested (D850*, Nikon Z7, Nikon Z6)
- tested (5DsR, 6D, EOS-R)
- only GFX50s is currently supported
- tested Z-CAM E2
- tested BMPCC4k, URSA Mini Pro via BT extension
- LANC control for other models released for beta testers
- Sony Venice
- tested via LAN
*For the Nikon D850 shutterspeed is only available in range of 1/30 – 1/8000. ISO, Aperture and other are fully configurable.
Our road map plans to add much more cameras during this year. Stay tuned!
Geotagging for DJI M600 or PixHawk & Sony cameras:
Entire supports writing of GPS / RTK and Gimbal angles* information from your flight controller (A3/N3/PixHawk) controller directly to the EXIF of photos in the camera SD card. Alternatively can be GPS data stored to the microSD card inserted in the SD slot of Entire. When PixHawk is connected, you can easily trigger photograph via MAVlink from your RC controller or mission event. If DJI flight controller is used, you can use Fport shutter for triggering camera in mission or manual flight.
*gimbal angles are available only for DJI flight controllers used with DJI gimbal.
EXIF is written with extremely high accuracy of 0.00000001 degree, which is approx. 1mm accuracy in the distance. Altitude is saved with 0.1mm accuracy. Gimbal angles (Roll/Pitch/Yaw) are available only when DJI gimbal is used.
Camera must support “Mass Storage” USB connection for direct EXIF upload of GPS (or RTK) data. Currently, all Sony cameras support “Mass Storage” mode.
In the moment of takeoff, Entire is opening the camera via USB and gets the latest file number. During the flight is Entire capturing each photo with GPS coordinates. In the moment of landing will Entire open the Camera again and upload all metadata right to the EXIF of each photo (JPG or ARW). Our method is very fast and usually takes only few seconds, for example geotagging of 100 photos taken during the flight takes less than 8 seconds (RAW or JPG).
No products were found matching your selection.